Medical Gas Pipeline System Cost in India 2026

Indicative MGPS Price Range for 2026

Hospitals planning oxygen, medical air, vacuum and nitrous oxide supply usually want a budget figure before drawings are final. The two ranges below are the figures Unicare publishes for medical gas pipeline work. They give a starting point for planning; they are not a quotation, and your final price is confirmed only after we review your project.

Important: these prices are indicative only and are not a quotation.

What the One-OT Figure Covers

The ₹60,000 – ₹1 Lakh range applies to medical gas pipeline work inside a single operation theatre. In a theatre, gases are delivered at outlets on the wall or on an OT pendant, and an anaesthetic gas scavenging system is often planned alongside. Where the number falls within the range depends on how many gases and outlets the theatre needs and how the pipeline reaches the room.

This figure is most useful when a hospital is adding or upgrading one theatre, or budgeting the gas portion of a modular operation theatre. For the complete theatre, see the modular OT cost guide.

What the Hospital Project Figure Covers

The ₹5 Lakh – ₹30 Lakh range applies to a hospital MGPS project, where gases are taken from a central source and distributed to several departments such as ICUs, wards, emergency, recovery and theatres. A typical project includes the source arrangement, the copper distribution pipeline, zone valve boxes, area and master alarms, and gas-specific oxygen and medical gas outlets on walls or bed head panels.

The lower end of the range reflects smaller buildings with fewer beds and gases; the upper end reflects larger buildings, more departments and more gases. Projects outside these sizes are quoted individually.

What Decides Your Final MGPS Cost

• Number of beds and outlets: Every bed or theatre position needs its own outlets and a pipe run to reach them. More beds and more outlets per bed mean more pipework, more outlets and more testing, so this is usually the biggest single driver of a hospital MGPS budget.
• Which gases are piped: A small hospital may pipe only oxygen and vacuum. A hospital with operation theatres usually also needs medical air and nitrous oxide, and each extra gas adds its own pipeline, valves, alarms and outlets.
• Gas source equipment: The plant room can be built around cylinder manifolds, a liquid oxygen tank, a PSA oxygen plant, medical air compressors and vacuum pumps, or a mix. The source chosen has a large effect on the total, and some hospitals already own part of it.
• Building layout and pipe length: A compact single-floor building needs far less copper than a multi-storey hospital with the plant room at one end. Shafts, ceiling access and the route between floors all change the length and difficulty of the pipeline.
• Zone valves and alarms: Each department normally has zone valve boxes so it can be isolated, and area alarm panels that show gas pressures. A master alarm monitors the sources. The number of departments decides how many of these are needed.
• New building or existing hospital: In a new building the pipeline is planned with the civil and electrical work. In a running hospital, work has to be phased around patients, existing services and ceilings, which can affect the schedule and cost.
• Testing and commissioning: Pressure testing, purging, cross-connection checks and gas identity checks at every outlet are part of a proper handover. The scope of testing and documentation requested in the tender is included in the quotation.

How to Get an Accurate MGPS Quotation

The fastest way to move from an indicative range to a firm price is to share the information our team uses to size the system:

1. Floor drawings showing departments and bed positions.
2. A bed count by department and the gases needed in each area.
3. Details of any existing source equipment, such as a manifold room or oxygen plant.
4. Whether the building is under construction or already running.
5. The design standard or specification named in your tender, if any.

With this, we prepare a gas schedule and pipeline layout, list the equipment and quantities, and send a project-specific quotation. If anything is still undecided, we can price options side by side, for example piping three gases now and leaving provision for a fourth.

Ways to Plan Your MGPS Budget

Planning gases early, while the building drawings are still flexible, usually avoids rework. Pipe routes can follow shafts and corridors, the plant room can be placed close to the main load, and outlets can be positioned in bed head panels from the start instead of being added later. In existing hospitals, phasing the work department by department keeps the hospital running while spreading the cost over time.

Whatever the size of the project, ask for a clear scope in the quotation: the gases included, the number of outlets, the alarms and valve boxes, the source equipment, and the testing and commissioning that will be carried out before handover. Comparing quotations on the same scope is the only reliable way to compare prices.

Learn more about the system itself on our medical gas pipeline system page, or read our general overview of MGPS standards.

FAQs